Skip to the content
Menu

Overview

Container loads by shape: 20 ft and 40 ft

The factory loads its shisha briquettes, sold in some markets as hookah coals, at its own loading bay. This page gives the declared load of each shape and what goes into the container with it.

Published by
PT Nargile Coconut Charcoal Indonesia
Published
Updated
Cartons stacked below the roof line leave room for air to move above the cargo.

In short

How many tons of shisha briquettes fit in a 20 ft or a 40 ft container?

A floor-loaded 20 ft container takes 18.5 to 20 t, depending on the shape, and a 40 ft container takes 26.5 t. On pallets the loads are about 16 t and 25 t. Every load of shisha briquettes keeps 30 cm left at the top, the headspace the carriage rules set for this cargo.

1. Tons per container, by shape

The load depends on the shape, because the pieces pack differently. The cartons stand on the container floor, and the declared figures are the tons each shape group fills.

Declared tons of shisha briquettes per floor-loaded container, by shape group, net weight, as stated by the factory.
Shape group20 ft container40 ft container
Cube 25–26 mm 20 t26.5 t
Cube 27–28 mm 19.5 t26.5 t
Hexagonal or flat 18.5 t26.5 t

Definition

floor-loaded

A floor-loaded container holds its cartons stacked directly on the container floor, without pallets.

Each size page carries its own load through every layer, from the 25 mm cube at the top of the table to the hexagonal shisha briquette at its foot.

2. Loading on pallets

On pallets, the container takes less, because the pallets take room. The pallets are wood, 110 × 110 cm, heat-treated and stamped (ISPM 15).

Declared tons of shisha briquettes per container when the cartons stand on pallets, net weight, as stated by the factory.
ContainerOn pallets
20 ft container about 16 t
40 ft container 25 t

The number of cartons that make up each load, floor-loaded and on pallets, is worked out on cartons per container, and the tons pallets cost against floor loading, shape by shape, on pallets or floor-loaded.

3. Headspace and stowage

Every load keeps 30 cm left at the top. That gap is the headspace, and the rules for this cargo set it together with how high the cartons may stand.

Definition

headspace

Headspace is the gap kept free above the cargo, up to the roof of the container.

Special provision 978 requires at least 30 cm of headspace when the packages are stowed in a container, and calls for a stowage height of no more than 1.5 m, or blocks of no more than 16 m³ with at least 15 cm between them.

Source: Resolution MSC.556(108): Amendments to the International Maritime Dangerous Goods (IMDG) Code, Amendment 42-24 (opens in a new tab), International Maritime Organization, opened

For UN 1361 in containers, the IMDG Code requires the doors and other openings to be sealed after packing, the hold temperature to be read and recorded once a day early in the morning during the voyage, and the cargo to be stowed away from sources of heat.

Source: Resolution MSC.556(108): Amendments to the International Maritime Dangerous Goods (IMDG) Code, Amendment 42-24 (opens in a new tab), International Maritime Organization, opened

The other conditions of carriage, from weathering to the papers, are on the carriage conditions.

4. Inside the container

Two things go into the container with the cartons: kraft paper on the container floor; 1 kg dry bags hung on the side walls, 6 in a 20 ft and 10 in a 40 ft.

Both are declared by the factory for every container. They are part of the load, and they are checked at loading with the rest of it.

Kraft paper laid on a container floor keeps the cartons off the bare floor.

5. Loading day

Loading is covered by the updates the buyer receives during the order: weekly updates on production, packing, quality checks and stuffing, every Monday; photographs of the empty container before loading and of the load.

An independent surveyor inspects the load before shipment and issues the vanning certificate; the factory pays for it inside the FOB price. The vanning certificate joins the other papers of the container, listed on the papers for the container. The whole day, step by step, is on loading day.

A seal on the container doors shows whether they have been opened since loading.

6. The minimum order

The minimum order is 1 ocean container, 20 ft or 40 ft. Mixed containers are accepted: each shape, size and design needs at least 2 t; the lines can be of different grades; a second grade of the same shape, size and design needs its own minimum; there is no surcharge.

Where loading sits in the order, between weathering and the balance payment, is shown on how an order runs.

Questions buyers ask

Can one container hold several sizes or grades?
Yes. Mixed containers are accepted: each shape, size and design needs at least 2 t; the lines can be of different grades; a second grade of the same shape, size and design needs its own minimum; there is no surcharge.
Who pays for the surveyor's inspection of the load?
The factory: an independent surveyor inspects the load before shipment and issues the vanning certificate; the factory pays for it inside the FOB price.

Sources

  1. Resolution MSC.556(108): Amendments to the International Maritime Dangerous Goods (IMDG) Code, Amendment 42-24 (opens in a new tab), International Maritime Organization — opened

Get the load and the price on one quote

The quote states the tons of your shape for the container you choose.

Request a quote