Skip to the content
Menu

Guide · Container

Pallets or floor-loaded: the cost in tons

A container of shisha briquettes can be loaded carton by carton on the floor, or on pallets. Pallets make unloading faster for a warehouse with a forklift, and they cost load: the tons below come from the factory's declared figures.

Published by
PT Nargile Coconut Charcoal Indonesia
Published
Updated
The stamp on a wooden pallet shows how the wood was treated.

In short

Should my container of shisha briquettes be loaded on pallets or on the floor?

Pallets cost load: about 16 t fit a 20 ft container on pallets, against 18.5 to 20 t floor-loaded. A 40 ft container takes 25 t on pallets and 26.5 t on the floor. The pallets are wood, 110 × 110 cm, heat-treated and stamped (ISPM 15). Floor loading fills the container; pallets suit a warehouse that unloads by forklift.

1. Tons on pallets and on the floor

Definition

palletized load

A palletized load is cargo stacked on pallets and loaded into a container pallet by pallet.

Floor loading puts more tons into the same container. The difference depends on the container size and, in a 20 ft container, on the shape.

Tons per container, floor-loaded and on pallets, and the tons lost to pallets, from the factory's declared loads.
Container and shapeFloor-loadedOn palletsLost to pallets
20 ft, cube 25–26 mm 20 tabout 16 tabout 4 t
20 ft, cube 27–28 mm 19.5 tabout 16 tabout 3.5 t
20 ft, hexagonal or flat 18.5 tabout 16 tabout 2.5 t
40 ft, every shape 26.5 t25 t1.5 t

Computed from the declared floor loads by shape and the declared pallet loads by container size; a count is by weight, not a packing plan.

The pallet load is declared per container size and is the same for every shape, so in a 20 ft container the difference grows with the shape's floor load: the cubes of 25 and 26 mm lose the most.

Cartons stacked below the roof line leave room for air to move above the cargo.

2. The pallet

The pallets are wood, 110 × 110 cm, heat-treated and stamped (ISPM 15). That is how the factory declares them, stamp included. The cartons on each pallet are strapped and wrapped in film.

What the stamp certifies under the international standard for wood packaging is not restated on this site until that line is checked at its publisher.

3. When pallets fit

Pallets fit a warehouse that unloads by forklift and wants each pallet moved in one lift. A floor-loaded container fits a warehouse that unloads by hand, and it carries more tons for the same freight.

The tons lost to pallets matter more in a 20 ft container, where they can be several tons, than in a 40 ft, where the difference is smaller. When the difference is small, handling usually decides; when it is large, the tons weigh more.

Three questions settle it for most importers.

  • Does your warehouse unload by forklift, or by hand?
  • Which costs you more: the tons a pallet takes, or the hours a floor load takes to unload?
  • Do your own customers take their deliveries on pallets?

4. What stays the same

Whichever way the cartons go in, the rest of the load is the same.

  • The load leaves 30 cm left at the top: the headspace.
  • The container gets kraft paper on the container floor; 1 kg dry bags hung on the side walls, 6 in a 20 ft and 10 in a 40 ft; each dry bag hangs on a side wall.
  • An independent surveyor inspects the load before shipment and issues the vanning certificate; the factory pays for it inside the FOB price. The surveyor issues the vanning certificate.
Kraft paper laid on a container floor keeps the cartons off the bare floor.

The day itself is on loading day, the surveyor on the surveyor's inspection, and the dry bags on moisture in the container.

5. Pallets in the quote

Say on the quote form whether you want the container on pallets or floor-loaded, and name the container size and the shape with it: the tons on pallets differ by both, as the table shows, and the quote is built on them. Pallets are priced in the quote.

Note

The tons of each shape floor-loaded are on loads by shape, and the cartons a container takes on cartons per container.

Questions buyers ask

Do I need pallets for a container of shisha briquettes?
No; the choice is the importer's. On pallets, a 20 ft container takes about 16 t and a 40 ft container 25 t.
What pallets does the factory use?
The pallets are wood, 110 × 110 cm, heat-treated and stamped (ISPM 15).

Get the load and the price on one quote

The quote states the tons of your shape for the container you choose.

Request a quote