Skip to the content
Menu

Specification · Briquettes

Shapes on request: 22 mm, finger, dome, block

Beside the six standard sizes of shisha briquettes, the factory presses four other shapes when an order asks for them, and buyers of hookah coals can order them like any size. What the factory has not declared for them is stated in the quote.

Published by
PT Nargile Coconut Charcoal Indonesia
Published
Updated

In short

Which other shapes can the factory make, and what does a quote for one need?

Four shapes are made on request besides the six standard sizes: a 22 mm cube, finger, dome and block. Each can fill a container of shisha briquettes or a line of at least 2 t in a mixed one. The dome is 20 × 35 mm and the block 26 × 35 mm; the finger is made to the size ordered. Dome and finger pieces are drop-tested from 30 cm.

Shapes made on request in brief

As stated by the factory, November 2026

Made on request
cube 22 mm, finger, dome and block
Dome
20 × 35 mm
Finger
made to the size ordered
Block
26 × 35 mm
Block in the bowl test
150 minutes
Pieces per kg
not counted
New mold
a shape made on request needs a new mold, and the factory pays for it
Mixed containers
accepted: each shape, size and design needs at least 2 t; the lines can be of different grades; a second grade of the same shape, size and design needs its own minimum; there is no surcharge
Drop test
a lit piece is dropped on a hard tiled floor, from 30 cm for hexagonal, dome and finger shapes and from 100 cm for cube and flat shapes; it passes if it stays whole after three drops
Printed boxes
from 2 t for every shape, size and pack variant
Minimum order
one container, 20 ft or 40 ft

1. The four shapes made on request

Definition

shape on request

A shape on request is a briquette shape that a factory presses only when an order asks for it, outside its standard sizes.

The shapes made on request are cube 22 mm, finger, dome and block. They sit beside the six standard sizes, each of which has its own page.

The standard sizes and the shapes made on request, as declared by the factory.
GroupShapes
Standard sizes Cube 25 mm, Cube 26 mm, Cube 27 mm, Cube 28 mm, Flat 25 × 25 × 15 mm and Hexagonal 24 × 50 mm
Made on request cube 22 mm, finger, dome and block

2. What the factory declares for them

The rules the factory declares for every line hold for these shapes too: the same checks of each batch, and a drop test at the height set for the shape.

  • The dome: 20 × 35 mm; the block: 26 × 35 mm; the finger: made to the size ordered.
  • The factory times a piece on a shisha bowl in use, until the smoking ends: a block lasts 150 minutes. No figure is declared for the 22 mm cube, the finger or the dome.
  • The drop test: a lit piece is dropped on a hard tiled floor, from 30 cm for dome and finger shapes and from 100 cm for cubes; it passes if it stays whole after three drops.
  • A batch fails on smell or smoke as the pieces warm up, high ash, cracked or broken pieces and pieces of uneven size or density.
  • The size check: four times a day, 20 pieces go under a digital caliper and each reading is logged.

Note

Not declared yet: the load per container, which the quote states. Pieces per kilogram are not counted for these shapes, so no count per box or carton is given either. The checks themselves are set out on the drop test in the checks.

3. Ordering a shape made on request

A shape made on request is ordered the way a standard size is. It can fill a container, or it can be one line of a mixed container. A shape made on request needs a new mold, and the factory pays for it.

A mixed container is accepted: each shape, size and design needs at least 2 t; the lines can be of different grades; a second grade of the same shape, size and design needs its own minimum; there is no surcharge. Produced to order; no stock.

Each line can be in a different grade. How many tons of each standard shape a container takes is on loads by shape; for a shape made on request the load is stated in the quote.

4. What the quote states

The quote for a shape made on request carries the figures the factory has not declared for it. Ask for each of them when you request the quote.

  • The size of a finger made to your order.
  • The pack you choose, 1 kg box, 1 kg unboxed plastic bag, 0.25 kg box or 0.5 kg box, and the packs per master carton.
  • The tons per container, floor-loaded or on pallets.

The limits every batch is made to, from moisture to ash, do not change with the shape; they are on the limits every batch is made to.

5. Printed boxes for these shapes

A shape made on request can go into boxes printed with the buyer's brand, on the same terms as any other shape.

A printed design starts at 2 t for every shape, size and pack variant; a new design takes 2 weeks to print. The private label terms, the artwork and the box are on printed boxes for a design.

An existing design is reprinted in about 2 weeks. A buyer's branded boxes are not sold to anyone else. Each inner pack and master carton is printed or neutral, as the quote states.

Questions buyers ask

Can one container hold a shape made on request beside the standard sizes?
Yes. A mixed container is accepted: each shape, size and design needs at least 2 t; the lines can be of different grades; a second grade of the same shape, size and design needs its own minimum; there is no surcharge.
How many pieces per kilogram is a 22 mm cube?
Pieces per kilogram are not counted for the shapes made on request, so no figure is stated; a line is ordered by weight, like any other.

Ask for a quote for this size

The quote form asks about the piece, the pack, the load, the papers and the port, in that order.

Request a quote