Skip to the content
Menu

Specification · Briquettes

Shisha briquette grades by ash content

The grades apply to every size on all sizes and grades. They sort the factory's shisha charcoal by one measured value, the ash it leaves, and the price list follows them.

Published by
PT Nargile Coconut Charcoal Indonesia
Published
Updated

In short

How are the grades of these shisha briquettes set, and what does each grade cost?

The grade follows the ash content alone: Platinum 1.6–1.9%, Super Premium above 1.9% and below 2.3%, and Premium 2.3–2.5%. Moisture, volatile matter and fixed carbon are measured and reported on each order's lab report, but they do not set the grade. Each grade's price is on the factory's dated list while one is in force, and in the quote otherwise.

The grades in brief

As stated by the factory, November 2026

Grades
Platinum, Super Premium and Premium
Platinum
1.6–1.9% ash
Super Premium
above 1.9% and below 2.3% ash
Premium
2.3–2.5% ash
What sets a grade
ash content alone decides the grade; the lab report also gives the moisture, the volatile matter and the fixed carbon
Basis of the ranges
on a dry basis
Lab report
available; one per order

1. Ash ranges by grade

Definition

grade

A grade is a named class of briquettes, set at this factory by a range of ash content.

Definition

ash content

Ash content is the share of a briquette's weight that is left as ash after it has burned, stated as a percentage.

Three grades are made, and ash content alone decides the grade; the lab report also gives the moisture, the volatile matter and the fixed carbon. Each grade is one band of ash content, and the bands are on a dry basis.

Ash content of each grade of shisha briquettes, in percent of weight, as declared by the factory.
GradeAsh content
Platinum 1.6–1.9%
Super Premium above 1.9% and below 2.3%
Premium 2.3–2.5%

2. What else is measured

The incoming shell charcoal is checked before it is pressed: moisture under 12%, at least 82% fixed carbon, at most 14% volatile matter, the ash content, the color of the ash. After drying, 48 hours or more per batch; moisture measured with a meter on every oven load; 2% at most.

Each order comes with a lab report: available; one per order. It reports moisture, volatile matter, fixed carbon and ash, so the grade can be checked against the ash it states.

Where the lab report sits among the papers of a container is shown on the lab report in the document set, and how to read one on reading a lab report.

3. Prices by grade

The factory gives each grade two prices on its dated list, one for full packaging and one for bulk packing. full packaging and bulk packing are the two packings the list names.

Price list of coconut shisha briquettes in US dollars per metric ton, FOB Semarang, for a 40 ft container, valid until 31 December 2026.
GradeFull packagingBulk
Platinum USD 1,850USD 1,800
Super Premium USD 1,750USD 1,700
Premium USD 1,650USD 1,600

Full packaging: 1 kg boxes in master cartons; the price is for neutral boxes. Bulk: 1 kg plastic bags without a box, in master cartons. Only the standard cubes (25 mm, 26 mm, 27 mm and 28 mm) are on the list; other shapes and boxes printed with the buyer's brand are priced in the quote. Each price is for one metric ton on board at the port of Semarang, before sea freight, insurance and import charges. The price of your order is the one written in your quote and on its proforma invoice.

How a price is built, layer by layer, is set out on the price page.

Only the standard cubes are on the list. Other shapes and boxes printed with your brand are priced in the quote, and so is the freight under CIF. How a price is built, layer by layer, is on how a price is built.

4. Choosing a grade

The grade changes two things: the ash range and the price. The size, the packing and the container stay yours to choose with any grade.

Tip

To compare grades, ask for a sample of two grades side by side, as set out on samples of two grades, and test them the way the factory does on testing a sample.

Questions buyers ask

Will a higher grade give a longer burn?
Not by the factory's account: the burn time depends on the size of the piece, not its grade. In its bowl test a 25 mm cube lasts 100 minutes and a 28 mm cube 130. The grades are set by ash content alone.
Why are moisture and fixed carbon not part of the grade?
Because ash content alone decides the grade; the lab report also gives the moisture, the volatile matter and the fixed carbon.

Ask for a quote for this size

The quote form asks about the piece, the pack, the load, the papers and the port, in that order.

Request a quote