In short
What limits are these shisha briquettes made to, and where is each one checked?
Every declared limit is checked at a set point in production, from the shell charcoal that arrives to the briquettes leaving the ovens. Incoming shell charcoal: moisture under 12%, at least 82% fixed carbon and at most 14% volatile matter. Size: ±0.3 mm per side. After drying: moisture 2% at most. Ash of the shisha briquettes by grade: Platinum 1.6–1.9%; Super Premium above 1.9% and below 2.3%; Premium 2.3–2.5%.
The specification in brief
As stated by the factory, November 2026
- Shell charcoal on arrival
- moisture under 12%, at least 82% fixed carbon, at most 14% volatile matter, the ash content and the color of the ash
- Size tolerance
- ±0.3 mm per side
- After drying
- 48 hours or more per batch; moisture measured with a meter on every oven load; 2% at most
- Platinum
- 1.6–1.9% ash
- Super Premium
- above 1.9% and below 2.3% ash
- Premium
- 2.3–2.5% ash
- What sets a grade
- ash content alone decides the grade; the lab report also gives the moisture, the volatile matter and the fixed carbon
- Basis of the ash ranges
- on a dry basis
1. Every declared limit in one table
Definition
specification
A specification is the set of limits a product is made and checked to, each naming the property it limits and the value it may not pass.
The table brings every declared limit together, in the order of production. How each check is run is on where each limit is checked.
| Stage | Limit | How it is checked |
|---|---|---|
| Shell charcoal on arrival | moisture under 12%, at least 82% fixed carbon and at most 14% volatile matter | Checked on arrival, with the ash content and the ash color |
| Size | ±0.3 mm per side | four times a day, 20 pieces go under a digital caliper and each reading is logged |
| After drying | moisture 2% at most | Measured with a meter on every oven load |
| Ash, Platinum | 1.6–1.9% | Reported on the lab report of each order |
| Ash, Super Premium | above 1.9% and below 2.3% | Reported on the lab report of each order |
| Ash, Premium | 2.3–2.5% | Reported on the lab report of each order |
2. Shell charcoal on arrival
The shell charcoal is checked on arrival for moisture under 12%, at least 82% fixed carbon, at most 14% volatile matter, the ash content and the color of the ash. These limits are for the raw material, before any binding, pressing or drying.
Definition
moisture content
Moisture content is the share of a briquette's weight that is water, given as a percentage of the whole.
The moisture on arrival is a different figure from the moisture after drying: the first applies to the shell charcoal, the second to the finished pieces. fixed carbon and volatile matter are limits of the shell charcoal too.
3. Size and tolerance
Every standard size is held to ±0.3 mm per side, the size tolerance the factory declares. Its check: four times a day, 20 pieces go under a digital caliper and each reading is logged.
| Size | Pieces per kg |
|---|---|
| Cube 25 mm | 72 pieces |
| Cube 26 mm | 64 pieces |
| Cube 27 mm | 54 pieces |
| Cube 28 mm | 48 pieces |
| Flat 25 × 25 × 15 mm | 106 pieces |
| Hexagonal 24 × 50 mm | 48 pieces |
For a shape outside the six standard sizes, the figures the factory has not declared come with the quote: see the shapes made on request.
4. Moisture after drying
After drying, the moisture of the pieces is 2% at most. The factory's setting: 48 hours or more per batch; moisture measured with a meter on every oven load; 2% at most.
How the ovens work in the production order is on drying in the ovens, and how the dried pieces are kept dry from box to container is on moisture from the oven to the container.
5. Ash and the grade
The grade follows one figure: ash content alone decides the grade; the lab report also gives the moisture, the volatile matter and the fixed carbon. The ash content of each grade is a range, on a dry basis.
- Platinum: 1.6–1.9% ash.
- Super Premium: above 1.9% and below 2.3% ash.
- Premium: 2.3–2.5% ash.
The grades and their prices are on ash by grade, and how a lab report gives these values is on the limits on a lab report.
6. What is not specified
Only the limits above are declared, so only they are stated here. A figure that is missing is not implied by the others.
- No burn time as a limit: the coil test has no declared target. The factory times a piece on a shisha bowl in use, until the smoking ends: there a 25 mm cube lasts 100 minutes and a 28 mm cube 130, and by its account the time depends on the size of the piece, not its grade.
- No calorific value and no sulfur figure.
- For the shapes made on request, only the sizes of the dome (20 × 35 mm) and the block (26 × 35 mm) are declared; their other figures come with the quote.
Note
Any other value you need can be asked for in the quote, and the lab report of each order gives the values it measures.